[1] Zhang B, Zhang F, Luo H. Virtual shaft-based synchronous analysis for bearing damage detection and its application in wind turbines. Wind Energy. 2022, 1-18.
[2] 胡政文, 张保强, 邓振鸿. 概率盒全局灵敏度和活跃子空间跨层降维[J]. 航空学报, 2021, 42(9):12.
[3] 张保强, 陈梅玲, 孙东阳, 等. 基于概率盒演化的时变系统不确定性量化方法[J]. 控制与决策, 2020, 35(10): 2459-2465.
[4] Hu Z, Zhang B, Yang J. A Two-Phase Monte Carlo Simulation/Non-Intrusive Polynomial Chaos (MSC/NIPC) Method for Quantification of Margins and Mixed Uncertainties (QMMU) in Flutter Analysis[J]. IEEE Access, 2020, 8: 118773-118786.
[5] 邓振鸿, 张保强, 苏国强,等. 基于近似似然的频响函数不确定性模型修正[J]. 振动．测试与诊断, 2020, 40(3):8.
[6] Zhang B, Guo Q, Wang Y, et al. Model-form and parameter uncertainty quantification in structural vibration simulation using fractional derivatives[J]. Journal of Computational and Nonlinear Dynamics, 2019, 14(5).
[7] Sun D, Zhang B, Liang X, et al. Dynamic analysis of a simplified flexible manipulator with interval joint clearances and random material properties[J]. Nonlinear Dynamics, 2019, 98(2): 1049-1063.
[8] 张保强, 苏国强, 展铭, 等. 概率盒框架下多响应模型确认度量方法[J]. 控制与决策, 2019, 34(12): 2642-2648.
[9] 张保强, 郭勤涛, 袁修开. 考虑模型形式误差的转子动力学修正及确认[J]. 振动. 测试与诊断, 2017, 37(2): 366-371.
[10] 张保强, 陈国平, 郭勤涛. 基于模态频率和有效模态质量的有限元模型修正[J]. 振动与冲击, 2012, 31(24): 69-73.
[11] Xiukai Y, Zhenxuan Z, Baoqiang ZHANG. Augmented line sampling for approximation of failure probability function in reliability-based analysis[J]. Applied Mathematical Modelling, 2020, 80: 895-910.
[12] 展铭, 郭勤涛, 岳林, 张保强. 基于多响应频响函数的加筋壁板结构模型修正[J]. 中南大学学报: 自然科学版, 2020, 51(5): 1228-1233.
[13] 锁斌, 孙东阳, 曾超, 张保强. 考虑随机不确定性的常态仿真模型确认试验设计[J]. 控制与决策, 2020, 35(8): 1923-1928.
[14] 黄虎, 闵强, 张保强, 等. 飞机典型液压管路系统减振优化计算方法研究[J]. 装备环境工程, 2020, 17(9): 66-71.
[15] Ming Z, Qintao G, Lin Y, BQ Zhang. Finite element model updating of jointed structure based on modal and strain frequency response function[J]. Journal of Mechanical Science and Technology, 2019, 33(10): 4583-4593.
[16] Suo B, Sun D, Zhang B, et al. Optimal Design of Validation Experiments Based on Area Metric Factor and Fuzzy Expert System[J]. IEEE Access, 2019, 7: 94907-94916.
[17] Sun D, Shi Y, Zhang B. Dynamic analysis of planar mechanisms with fuzzy joint clearance and random geometry[J]. Journal of Mechanical Design, 2019, 141(4).
[18] Zhan M, Guo Q, Yue L, BQ Zhang. Modeling and stochastic model updating of bolt-jointed structure[J]. Shock and Vibration, 2018, 2018.
[19] Sun D, Shi Y, Zhang B. Robust optimization of constrained mechanical system with joint clearance and random parameters using multi-objective particle swarm optimization[J]. Structural and Multidisciplinary Optimization, 2018, 58(5): 2073-2084.
[20] 袁修开, 朱海燕, 张保强. 结构可靠性优化求解的解耦融合策略[J]. 工程力学, 2018, 35(5): 102-108.
[21] 田德红, 何建敏, 张保强. 基于 NRS-SVM 模型的航空弹药消耗预测研究[J]. 南京航空航天大学学报, 2018, 50(5): 666-671.
[22] 展铭, 郭勤涛, 岳林, 张保强. 使用应变模态和遗传算法的有限元模型修正方法[J]. 振动. 测试与诊断, 2018, 38(05): 974-978.
[23] Zhang X, Chen F, Zhang B, et al. Local bifurcation analysis of a rotating blade[J]. Applied Mathematical Modelling, 2016, 40(5-6): 4023-4031.
[24] 孙东阳, 陈国平, 张保强. 随机和认知不确定性量化的置信区域法[J]. 振动. 测试与诊断, 2015, 35(5): 908-912.
[25] Sun R, Chen G, He H, et al. The impact force identification of composite stiffened panels under material uncertainty[J]. Finite Elements in Analysis and Design, 2014, 81: 38-47.
[26] 冯娅娟, 陈国平, 张保强. 卫星帆板不确定性分析[J]. 机械设计与制造, 2014, 1.
会议论文
[1] Chen Q, Zhang B*, Yang J, et al. Model Updating and Uncertainty Propagation in Aerothermoelastic Analysis for C/SiC Panel of Ceramic Matrix Composite[C]//21st AIAA International Space Planes and Hypersonics Technologies Conference. 2017: 2359.
[2] Yang J, Zhang B*, Chen Q, et al. Quantification of margins and uncertainties approach for aerothermoelastic analysis based on non-intrusive polynomial chaos method[C]//21st AIAA International Space Planes and Hypersonics Technologies Conference. 2017: 2395.
早期论文
[1] ZHANG B, Guoping CHEN, Qintao GUO. Static frame model validation with small samples solution using improved kernel density estimation and confidence level method[J]. Chinese Journal of Aeronautics, 2012, 25(6): 879-886.
[2] 张保强, 陈国平, 郭勤涛. 不确定性热弹耦合梁的固有振动分析[J]. 振动与冲击, 2012, 31(19): 160-164.
[3] 张保强, 陈国平, 郭勤涛. 使用有效模态质量和遗传算法的有限元模型修正[J]. 振动. 测试与诊断, 2012, 32(4): 577-580.
[4] 张保强，陈国平，郭勤涛．模型确认热传导挑战问题求解的贝叶斯方法．航空学报，2011，32（7）：1202-1209．
[5] 张保强，陈国平，郭勤涛．结构动力学模型确认问题的核密度估计方法．机械工程学报，2011，47（17）：29-36．
[6] 张保强，郭勤涛，陈国平．基于复模态模型修正方法的磁悬浮轴承支承参数识别．南京航空航天大学学报，2010，42（6）：748-752．
[7] Zhang BaoQiang, Chen GuoPing, Guo QinTao. Finite element model updating based on complex modal analysis for unsymmetrical damping system. Cheng Du: ICCET 2010-2010 International Conference on Computer Engineering and Technology, ICCET, 2010, 5: 556-560.
[8] Zhang BaoQiang, Chen GuoPing, Guo QinTao. Finite element model updating for unsymmetrical damping system with Genetic Algorithm. Applied Mechanics and Materials, 2012, 166-169: 2999-3003.
[9] 常涛, 郭勤涛, 张保强. 应用模型修正方法的印制电路板参数识别[J]. 振动．测试与诊断, 2013, 33(3):5.
[10] 徐尧, 郭勤涛, 张保强. 基于响应面法的大型机械传动系统扭转振动可靠性分析[J]. 机械设计, 2012, 29(2):5.
[11] 李鸿秋，陈国平，张保强．考虑声振耦合下结构阻尼板降噪拓扑优化设计．振动、测试与诊断，2011，31（5）：586-590．
[12] 茅志颖，陈国平，张保强．利用拓扑优化的结构微小损伤定位研究．振动与冲击，2012，31（4）：25-29．
[13] 茅志颖，陈国平，张保强．运用拓扑优化的结构损伤定位．振动、测试与诊断，2012，32（1）：42-45．
