一、研究成果
研究成果多次被NASA 技术简报报道(Maturation of Structural Health Management Systems for Solid Rocket Motors, NASA Tech Briefs, 2011 ；Autonomous System for Monitoring the Integrity of Composite Fan Housings，NASA Tech Briefs, 2010；Flexible Structural-Health-Monitoring Sheets, NASA Tech Brief, 2008 ； Hybrid Piezoelectric/Fiber-Optic Sensor Sheets-Multiple Sensors of Different Types Could be Installed On Or In Structures, MNASA Tech Briefs, 2004).
二、发表期刊与会议论文130 多篇， 部分代表性论文：
1. 王奕首，卿新林，复合材料连接结构健康监测技术研究进展[J].复合材料学报，2015.
2. Cai, J., Yuan, S., Qing, X., Chang, F.-K., Shi, L. and Qiu, L., Linearly dispersive signal construction of Lamb waves with measured relative wavenumber curves, Sensors and Actuators A: Physical, 221: 41–52 , 2015.
3. Hong, M., Su, Z., Ye, L., Sohn, H. and Qing, X. , Locating fatigue damage using temporal signal features of nonlinear Lamb waves, Mechanical Systems and Signal Processing, 60-61:182-197, 2015.
4. Wang, Y., Gao, L., Qiu, L., Yuan, S. and Qing, X., An adaptive filter based temperature compensation technique for structural health monitoring, Journal of Intelligent Material Systems and Structures, 25 (17): 2187-2198, 2014.
5. Zhao, L., Zhang, B. and Qing, X., Prediction of the biaxial failure strength of composite laminates with unit cell analytic model, Journal Wuhan University of Technology, Materials Science Edition, 29(5): 923-927, 2014.
6. Hong, M., Su, Z., Wang, Q., Cheng, L. and Qing, X., Modeling nonlinearities of ultrasonic waves for fatigue damage characterization: theory, simulation,and experimental validation, Ultrasonics, 54:770-778, 2014.
7. Su, Z., Zhou, C., Hong, M., Cheng, L., Wang, Q. and Qing, X., Acoustoultrasonics-based fatigue damage characterization: linear versus nonlinear signal features, Mechanical Systems and Signal Processing, 45:225-239, 2014.
8. Qiu, L., Liu, M., Qing, X. and Yuan, S., A quantitative multidamage monitoring method for large-scale complex composite, Structural Health Monitoring, 12(3): 183-196, 2013.
9. Cai, J., Shi, L. and Qing, X., A time–distance domain transform method for Lamb wave dispersion compensation considering signal waveform correction, Smart Materials and Structures, 22(10): 105024, 2013.
10. Gao, L. and Qing, X., Sensing of Damage in Glass Fiber Composites by Adding Carbon Nanotubes, Applied Mechanics and Materials, Vol. 330, pp.68-76, 2013.
11. 蔡建, 石立华, 卿新林, 考虑波形修正的Lamb 波时间-距离域映射方法, 仪器仪表学报, 34(5): 1015-1021, 2013.
12. 蔡建, 石立华, 卿新林, 基于相对测量波数的线性频散信号构建方法, 仪器仪表学报, 34(4): 948-954, 2013.
13. 蔡建, 石立华, 卿新林, 杜朝亮. 基于非频散信号构建的Lamb 波高分辨率损伤成像方法, 航空学报, 34(8): 1815-1823, 2013.
14. 赵琳, 张博明, 卿新林, 谢惠民. 基于单胞解析模型的复合材料面内剪切性能与损伤分析，复合材料学报, 30: 153-157, 2013.
15. 郭艳丽, 李旭, 叶金蕊, 白光辉, 卿新林, 张博明, 晏冬秀，邵严. 高密度分布式光纤传感技术在FRP 复合材料结构健康监测中的应用，复合材料学报,30: 247-250, 2013.
16. Du, C., Wang, Y., Gao, D., Liu, K. and Qing, X., In-situ quantitative monitoring of fatigue crack using fastest time of flight diffraction method.Transactions of Nonferrous Metals Society of China, 22(11)：2679−2684,2012.
17. 卿新林, 王奕首, 赵琳, 结构健康监测技术及其在航空航天领域中的应用.实验力学, 27(5):517-526, 2012.
18. 卿新林, 王奕首, 高丽敏, 多功能复合材料结构状态感知系统, 实验力学,26(5):611-616, 2011.
19. Banerjee, S., Qing, X., Beard, S. and Chang, K.-K., Prediction of Progressive Damage State at the Hot Spots Using Statistical Estimation, Journal of Intelligent Material Systems and Structures, 2010.
20. Qing, X. P., Beard, S., Shen, S., Banerjee, S. etc. Development of a real-time active pipeline integrity detection system, Smart Materials and Structures, Vol.18, No. 11, 2009.
21. Qing, X. P., Beard, S. J., Ikegami, R., Chang, F.-K. and Boller, C., Aerospace applications of SMART Layer technology, Encyclopedia of Structural Health Monitoring, Wiley, 2009
22. Qing, X. P., Beard, S. J., Kumar, A., etc., SMART Layer Technology and its applications, Encyclopedia of Structural Health Monitoring, Wiley, 2009.
23. Wu, Z., Qing, X. and Chang, F.-K., Damage detection for composite laminate plates with a distributed hybrid PZT/FBG sensor network, of Intelligent Material Systems and Structures, Vol. 20, No. 9, 2009.
24. Qing, X. P., Beard, S. J., Kumar, A., etc., Performance of piezoelectric sensors based SHM system under combined cryogenic temperature and vibration environment, Smart Materials and Structures, Vol. 17, No.5, 2008.
25. Wu, Z., Qing, X., Ghosh, K., Karbhar, V. and Chang, F.-K., Health monitoring of bonded composite repair in bridge rehabilitation, Smart Materials and Structure, Vol. 17, No.4, 2008.
26. Qing, X. P., Beard, S., etc., Built-in sensor network for structural health monitoring of composite structure, Journal of Intelligent Material Systems and Structures, Vol. 18, No. 1, 2007.
27. Hua, T., Xie, H., Pan, B., Qing, X., etc. A new micro-tensile system for measuring the mechanical properties of low-dimensional materials-Fibers and films, Polymer Testing, 26 (4), 2007.
28. Qing, X. P., Beard, S. J., Kumar, A. and Hannum, R., A real-time active smart patch system for monitoring the integrity of bonded repair on an aircraft structure, Smart Materials and Structures, Vol. 17, June, 2006.
29. Qing, X. P., Beard, S. J., Kumar, A. etc., Advances in the development of built-in diagnostic system for filament wound composite structures, Composite Science and Technology, Vol. 66, No. 11-12, 2006.
30. Qing, X. P., Chan, H.-L., Beard, S. J., etc., Effect of adhesive on the performance of piezoelectric transducer for structural health monitoring, International Journal of Adhesion and Adhesive, 26, 2006.
31. Qing, X. P., Chan, H.-L., Beard S. J. and Kumar, A., A smart tape diagnostic system for structural health monitoring of rocket engine, Journal of Intelligent Material Systems and Structures, July, 2006.
32. Qing, X., Kumar, A., Zhang, C. , etc., Hybrid piezoelectric/fiber optic diagnostic system for structural health monitoring, Smart Materials and Structures, Vol.14, No.3, 2005.
33. Qing, X., Chang, F.-K. and Starnes, J., Damage tolerance of notched composite laminates with reinforcing strips, Journal of Composite Materials, Vol. 37, No.2,2003.
34. Sun, H., Chang, F.-K. and Qing, X., The Response of composite joints with bolt clamping loads Part I: model development, Journal of Composite Materials, Vol.36, No.2. 2002.
35. Sun, H., Chang, F.-K., and Qing, X., The response of composite joints with boltclamping loads Part II: model verification, Journal of Composite Materials,Vol.36, No. 2. 2002.
36. Sehitoglu, H., Qing, X., Smith, T., Maier, H. and Allison, J., Stress-strain response of a cost Al319-T6 under thermo-mechanical loading, Physical Metallurgy and Materials Science A: Metallurgical and Materials Transactions,Jan., 2000.
37. Qing, X., Gu, Y., Dai, F. and Liang, K., Crack-tip transformation zones of CeO2-stabilized tetragonal ZrO2 polycrystals. J. Mater. Sci. Lett. Vol. 16, No 8,1997.
38. Qing, X., Qin, Y. and Dai, F., Experimental investigation of micromechanical behavior of advanced materials by moire interferometry. Opt. & Las. in Eng.,Vol. 25, No 2-3, Aug.-Sept. 1996.
39. Qing, X. and Qin, Y., An experimental investigation of carbon-fiber/aluminum laminates with double-edge cracks. Composite Science and Technology, Vol.53, No 4, 1995.
40. Mao, T., Han, J., Qing, X. and Dai, F., Experimental investigation of bending behavior in CALL hybrid composites. Composite Science and Technology,Vol.53, No.3, 1995.
41. Qing, X., Qin, Y. and Dai, F., Optical fringe multiplication in moire interferometry, Appl. Opt., Vol. 34, No 31, Nov. 1995.
42. Qing, X., Qin, Y., Dai, F. and Sun, Q., Experimental investigation of the transformation zone of tetragonal zirconia polycrystalline ceramics. J. Mater.Sci., Vol.30, No 24, Dec. 1995.
三、专利情况：
美国专利：
1. Beard, B., Zhang, D. and Qing, X., Transducer array self-diagnostics and selfhealing,US Patent 9,109,999, 2015.
2. Qing, X., Li, I. J. and Zhang, C.，Structural health monitoring system having integrated power supply，US Patent 8,639,453, 2014.
3. Banerjee, S., Qing, X., Beard, S.J. and Chang, F.K., Method and apparatus for estimating damage in a structure, US Patent 8,521,444, 2013.
4. Qing，X., Zhang，C., Li，I. J., Chang，F.-K. and Chung，H.，Integrated circuit system for controlling structural health monitoring processes，US Patent 8,352,201, 2013.
5. Qing, Xinlin, Beard, S. J. and Li, I. J., Method and apparatus for conducting structural health monitoring in a cryogenic, high vibration environment, US Patent 8,347,722, 2013.
6. Beard, S. J., Qing, X., Chang, T. and Ouyang, L., Optimal sensor location for damage detection, US Patent 8,301,400, 2012.
7. Qing, X., Zhang, C., Li, I., Chang, F.-K and Chung, H., Integrated circuit system for controlling structural health monitoring processes and applications,US Patent 8,265,889, 2012.
8. Zhang, C., Qing, X. and Li, I., Structural health monitoring system having memory on structure, US Patent 8,244,486, 2012.
9. Beard, S. and Qing, X., Method and apparatus for reducing crosstalk in structural health Monitoring System, US Patent 7,596,078, 2009.
10. Malkin, M C. and Qing, X., Method and apparatus and method for connecting a first flat conductor with a second conductor, US Patent 7,507,100, 2009.
11. Lu, Y., Qing, X., Zhang, C. and Li, I., Vehicle systems and methods for detecting pedestrian impacts, US Patent 7488015, 2009.
12. Qing, X. and Chang, F.-K., Method of manufacturing a structural health monitoring layer, US Patent 7,413,919, 2008.
13. Qing, X., Zhang, C. and Li, I., Method of detecting and analyzing changes in the external loading conditions of structure. US Patent 7430911, 2008.
14. Qing, X., Beard, S., Yu, Z. and Li, I., Method and apparatus for switching among elements of a structural health monitoring system, US Patent 7,395,189,2008.
15. Qing, X. and Beard, S., Single-wire sensor/actuator network for structural health monitoring, US Patent 7,387,033, 2008.
16. Beard, S., Qing, X., Chan, H., Zhang, C. and Chang, F.-K., Method and apparatus for detecting a load change upon a structure and analyzing characteristics of resulting damage, US Patent 7,458,266, 2008.
中国专利：
17. 卿新林，蔡建，孙虎，⼀一种⽤用于⾼高应变场合的压电传感元件，实⽤用新型专利，专利号： ZL 2014 2 0162519.5，授权公告⽇日 2014/10/08。
18. 鲁明宇，卿新林，⼀一种⽤用于安装传感器接头的装置，实⽤用新型专利，专利号： ZL 2014 2 0348547.6，授权公告⽇日 2014/11/05。
19. 赵琳，卿新林，鲁明宇，杨海楠，⼀一种压电传感器辅助安装装置，实⽤用新型专利，专利号： ZL 2014 2 0350888.7， 授权公告⽇日 2014/11/05。
20. 孙虎，卿新林，⼀一种结构剩余寿命⾃自动化快速评估⽅方法和系统，申请号:CN201510728140.5。
21. 卿新林，蔡建，孙虎，杨海楠，赵琳，复合材料结构的损伤监测⽅方法、装置和系统，申请号: CN201510438873.5。6] 崔世蒙，卿新林，⽩白志强，刘志⽅方，⼀一种⽆无刷直流电机故障监控⽅方法及装置，申请号: CN201510434976.4。
22.
23. 蔡建，卿新林，袁慎芳，鲁明宇，⾼高丽敏，相控阵定量化损伤监测⽅方法、装置和系统，申请号: CN201510349333.X。8] 杜朝亮，杨海楠，胡婷萍，卿新林，⼀一种监测各向异性材料裂纹损伤的⽅方法，申请号: CN201510271766.8。
24.
25. 卿新林，⾼高丽敏，袁慎芳，邱雷，复合材料板结构的损伤监测⽅方法，申请号: CN201410158828.X。
26. 蔡建，卿新林，⾼高丽敏，⼀一种基于虚拟时间反转的声发射被动成像⽅方法和装置，申请号: CN201410147838.3。
27. 杜朝亮，王奕⾸首，赵群，卿新林，⼀一种结构件探伤监测温度补偿⽅方法及系统，申请号: CN201410135809.5。
28. 卿新林， ⾼高丽敏， 蔡建， 航空器的结构健康监测系统， 申请号:CN201410135807.6。
29. 杜朝亮，赵琳，⾼高丽敏，卿新林，⼀一种损伤定量化监测⽅方法及系统，申请号: CN201410135808.0。
30. 卿新林， 蔡建， 复合材料机械连接结构综合监测系统， 申请号:CN201410079562.X。
31. 卿新林，邱雪琼，⼀一种分布式多功能结构状态探测系统，申请号:CN201410077875.1。
32. 杜朝亮， 王奕⾸首， 卿新林， ⼀一种温度补偿⽅方法及装置， 申请号:CN201410011527.4。
33. 杜朝亮，姜丽丽，卿新林，⼀一种基于能量分布向量⽐比的触击位置和能量测量⽅方法，申请号: CN201210560733.1。
34. 杜朝亮，姜丽丽，卿新林，基于波传播时间及能量函数的触击位置和能量测量⽅方法，申请号: CN201210560122.7。
35. 杜朝亮，王奕首，卿新林，⼀一种⼆二维损伤定量化监测⽅方法，申请号:CN201210489424.X。
36. 杜朝亮，王奕首，卿新林，⼀一种线性缺陷定量化监测⽅方法，申请号:CN201210488569.8。
